CubCopter WS (Wide Stance)
The CubCopter WS is the same base frame as the CubCopter except for the configuration of the landing gear. This landing gear layout allows for a less obstructed payload area underneath the frame. Increasing room for bigger cameras or any other type of payload. It also decreases the chance of flipping the drone if you hit the ground while still flying horizontally.
basic kit includes the complete bare steel kit and hardware to assemble the frame.
coating with your choice of color. The color in the pictures is Extreme Chrome
plate kit which includes the three carbon fiber plates as pictured, two feet of
aluminum 3003-0 TUBE and hardware
to mount as pictured. Note: aluminum tube spacers are provided in two 12"
lengths. They are not cut to size. This is in case the 1" spacing on my
builds are different from your needs. A tubing cutter or hacksaw will be needed
for the build. Two feet should be plenty for any build with leftovers but we
can provide more if needed.
are fabricated and built on order by real people, not machines. Please allow
4-8 days for the kit to be built.
in the U.S.A.